smp6lc05-2p thru smp6lc24-2p 1 05088.r4 3/05 www .protekde vices.com low capacitance tvs arra y only one name means protektion? applications ? t1/e1 ? cellular phones ? portable electronics ? wireless lans ? video inputs iec compatibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 8/20s - 95a, l4(line-gnd) & 48a, l4(line-line) & 83a, l2(power) features ? 3,600 watts peak pulse power per line (tp=8/20s) ? 600 watts peak pulse power per line (tp=10/1000s) ? bidirectional configuration ? high surge capability: 80a (10/1000s) ? available in multiple voltages ? protects two (2) bidirectional lines ? ? ? ? ? low capacitance: < 30pf per line pair ? rohs compliant in lead-free versions mechanical characteristics ? molded jedec so-16 package ? weight 0.15 grams (approximate) ? available in tin-lead or lead-free pure-tin plating(annealed) ? solder reflow temperature: tin-lead - sn/pb, 85/15: 240-245c pure-tin - sn, 100: 260-270c ? flammability rating ul 94v-0 ? 16mm tape and reel per eia standard 481 ? marking: logo, part number, date code & pin one defined by dot on top of package so-16 05088 pin configura tion
2 www .protekde vices.com 05088.r4 3/05 smp6lc05-2p thru smp6lc24-2p device characteristics maximum ratings @ 25c unless otherwise specified peak pulse power (t p = 8/20s) operating temperature symbol value -55 c to 150 c c c -55 c to 150 c watts units 3,600 t j p pp t stg parameter storage temperature peak pulse power (t p = 10/1000s) - see figure 1 watts 600 p pp electrical characteristics per line @ 25c unless otherwise specified pa rt number (note 1) rated stand-off voltage v wm volts minimum breakdown voltage @ 1ma v (br) volts maximum leakage current @ v wm i d a maximum clamping voltage (see fig. 2) @ i pp = 10a v c volts smp6lc05-2p smp6lc6.5-2p smp6lc08-2p smp6lc12-2p SMP6LC15-2P smp6lc24-2p 5.0 6.5 8.0 12.0 15.0 24.0 6.0 7.2 8.5 13.3 16.7 26.7 300 300 25 2 2 2 9.6 12.4 13.6 19.9 24.4 38.9 15 15 15 15 15 15 typical capacitance @0v, 1mhz c pf note 1: do no surge from pins 15/16 to 1/2, 3/4 to 13/14, 11/12 to 5/6 and 7/8 to 9/10. piv typically greater than 100 volts for eac h rectifier diode.
3 www .protekde vices.com 05088.r4 3/05 smp6lc05-2p thru smp6lc24-2p graphs 0 1 2 3 t - time - s 0 50 100 i pp - peak pulse current - % of i pp test waveform parameters t f = 10s t d = 1,000s t f peak value i pp e -t figure 2 pulse wave form t d = t i pp /2 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 10/1000s average power figure 3 power derating curve 0 0.1 1 10 100 1,000 10,000 100,000 t d - pulse duration - s 600w 10/1000s waveform 0.1 1 10 100 p pp - peak pulse power - kw figure 1 peak pulse power vs pulse time
4 www .protekde vices.com 05088.r4 3/05 smp6lc05-2p thru smp6lc24-2p copyright ? protek devices 2005 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www .protekde vices .com a b c d f g j k p r 10.00 4.00 1.75 0.49 1.25 1.27 bsc 0.25 0.25 6.20 0.50 0.386 0.150 0.054 0.014 0.016 0.05 bsc 0.008 0.004 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.05 bsc 0.009 0.009 0.244 0.019 9.80 3.80 1.35 0.35 0.40 1.27 bsc 0.19 0.10 5.80 0.25 dim min max min max millimeters inches package dimensions notes 1. - t - = seating plane and datum surface. 2. dimensions ?a? and ?b? are datum. 3. dimensions ?a? and ?b? do not include mold protrusions. 4. maximum mold protrusion is 0.015? (0.380 mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. 6. dimensions are exclusive of mold flash and metal burrs. package outline so-16 mounting pad m -a- -b- p d g -t- k c j r x 45 o f 0.010? (0.25 mm) m b m 8 pl 0.010? (0.25 mm) s b m 16 pl t a s 16 9 8 1 0 o - 7 o 0.050? typ 0.030? 0.005? 0.245? min 0.160? 0.005? 0.045? 0.005? tape & reel/bulk ordering nomenclature 1. surface mount product is taped and reeled in accordance with eia-481. 2. suffix-t7 = 7 inch reel - 1,000 pieces per 16mm tape, i.e., smp6lc05-2p-t7. 3. suffix-t13 = 13 inch reel - 2,500 pieces per 16mm tape, i.e., smp6lc05-2p-t13. 4. suffix - lf = lead-free, pure-tin plating, i.e., smp6lc05-2-lf-t7. 5. no suffix = product shipped in tubes of 37 pcs per tube. outline & dimensions: rev 1 - 11/01, 06007
|
